SMC FC is a great app, however although it`s recently updated, functionality is limited compared to some newer apps, equally SMC Fan Control is rock steady stable and a finished product. Strictly speaking Apple`s own cooling algorithm works, albeit at sacrifice of increased temps for quieter operation. 'SMC Fan Controller' that works for my school's 1.8 GHz PowerPC G5. PPC Mac's do not have the System Management Controller (SMC).

NVRAM (nonvolatile random-access memory) is a small amount of memory that your Mac uses to store certain settings and access them quickly. PRAM (Parameter RAM) stores similar information, and the steps for resetting NVRAM and PRAM are the same.

Settings that can be stored in NVRAM include sound volume, display resolution, startup-disk selection, time zone, and recent kernel panic information. The settings stored in NVRAM depend on your Mac and the devices that you're using with your Mac.

If you experience issues related to these settings or others, resetting NVRAM might help. For example, if your Mac starts up from a disk other than the one selected in Startup Disk preferences, or a question mark icon briefly appears before your Mac starts up, you might need to reset NVRAM.

How to reset NVRAM

Shut down your Mac, then turn it on and immediately press and hold these four keys together: Option, Command, P, and R. You can release the keys after about 20 seconds, during which your Mac might appear to restart.

  • On Mac computers that play a startup sound, you can release the keys after the second startup sound.
  • On Mac computers that have the Apple T2 Security Chip, you can release the keys after the Apple logo appears and disappears for the second time.

If your Mac is using a firmware password, this key combination does nothing or causes your Mac to start up from macOS Recovery. To reset NVRAM, first turn off the firmware password.

When your Mac finishes starting up, you might want to open System Preferences and adjust any settings that were reset, such as sound volume, display resolution, startup disk selection, or time zone.

Learn more

  • If you're using a desktop Mac instead of a notebook, and settings such as sound volume or time zone are reset every time you shut down and unplug your Mac, you might need to replace the battery inside your Mac. This small battery is on your computer's logic board, and it helps NVRAM retain settings when your Mac is unplugged. You can take your Mac to an Apple service provider to replace the battery.
  • If you experience issues with sleep, wake, power, charging your Mac notebook battery, or other power-related symptoms, you might need to reset the SMC (System Management Controller).

Publisher’s note: This article, originally written by Ed Eubanks Jr and published on 2007.03.12, has been the most popular article in the history of Low End Mac with well over 2 million hits. It was written toward the end of the Mac OS X 10.4 Tiger era and has been updated since its first publication. Most of these tips apply to Intel-based Macs running Tiger, but we specifically address G3, G4, and G5 PowerPC Macs, since Intel Mac users really should be using something newer than Tiger by now (we love OS X 10.6 Snow Leopard, the last version before OS X became heavily influenced by iOS). We hope to add similar articles covering later versions of OS X.

  • If you find Ed’s articles helpful, please consider making a donation to his tip jar.

Every now and then, my Macs begin to feel a little sluggish. There are many potential reasons why: I tend to run 8 to 10 applications all the time – and sometimes push 15 or more. This alone will bog down any Mac.

At other times, I realize that it’s been weeks since I restarted the computer, and a simple restart will solve a lot of these woes.

When those don’t speed things up, I’ve found a number of things I can do to encourage my Macs back to their youthful snappiness. Here are a few tips I’ve found for restoring my Macs to full speed without spending a penny.

Publisher’s note: None of these tips will improve your Mac’s performance as much as more system memory (RAM), a faster hard drive, or a CPU upgrade, which isn’t always possible. They mostly have to do with reducing memory use by limiting the number of active processes and freeing up drive space, since a too full drive (especially past the 90% mark) can slow down your Mac. These are tips for getting the most out of the Mac you currently have without investing in hardware upgrades. dk

1. Clean Out Startup Items

Some applications automatically (or when asked) set themselves as a Login Item, which causes them to open at every restart or login. You can find out what is in your startup items list by navigating to Apple Menu > System Preferences > Accounts > Login Items. You may be surprised at how many there are.

To remove them, simply select the item by clicking on its name and then hit the “minus” button at the bottom of the list. However, be sure that you know what you’re removing; otherwise you may kill some critical function for the next time you restart.

Pembury estate gang members jailed for mac. Pembury Estate gang members jailed for Mac-10 'spray and pray' sub-machine gun plot. Four gang members have been jailed for plotting to retrieve a sub-machine gun linked to a series of underworld shootings from a stolen car in Hackney. To send a link to this page you must be logged in. The Pembury Estate consists of two sections of the housing estate: Old Pembury and New Pembury. Old Pembury consists 24 walk-up blocks. New Pembury consists of multiple 1960s styled bungalows. The Pembury Estate has approximately 1,500 to 2,000 residents. The Pembury Estate has had a reputation for gang crime and violence.

2. Turn Off Universal Access, Bluetooth, Speech Recognition, and Internet Sharing if You Don’t Use Them

While System Preferences is open, take a look at a few other things. Apple has generously included a number of very useful features as preferences. Some, however, may not be useful to you, such as Universal Access (which offers help for visually and hearing impaired users) or Bluetooth (which allows certain devices to be used wirelessly). If you don’t use these features, verify that they are turned off. This will save you some valuable RAM and processor resources. If you’re using a PowerBook or iBook, this may also improve battery life.

3. Clean Out ‘Other’ System Preferences

Don’t close System Preferences yet! Take a peek in the bottom section of your System Preferences window, labeled Other. How many items are down there? Do you know what they do? Do you use what they do?

If there is a Preference Pane that you don’t use or that you use only occasionally, disable it (either turn it “off” within the Preference Pane itself or remove it from the folder “~/Library/PreferencePanes”).

4. Check Out What ‘Build’ Your Software Is

If you’re running an Intel Mac, some of your software may be running under the Rosetta PowerPC translator, which allows software programs built for a PowerPC processor to run on an Intel Mac. Rosetta is surprisingly efficient, but don’t use it if you don’t have to! There may be a patch for your favorite application that will upgrade it to a “universal build”. By making sure you’re running the latest version, you can be confident you’re not using Rosetta in vain (a utility like the App Update widget will help with this).

5. Clean Out Unnecessary Code

Your Mac is either running a PowerPC or Intel processor. You don’t have to understand what this means, but you should know that, with both being options, most recent software comes programmed for both. But you don’t need optimization for both – you only need optimization for your computer. Fortunately, there are utilities like XSlimmer (and Monolingual – more on this in a minute) that will strip out unnecessary code in your software. This not only helps the applications run faster; it also saves hard drive space (sometimes a lot of it). Xslimmer maintains a downloadable list of software that should not be modified, and it’s only available for Intel Macs.

Monolingual lets you remove unwanted chip architectures.

Publisher’s note: If you’re using a PowerPC Mac and anticipate migrating to Intel, you might want to defer “slimming” your programs until after you’ve made the switch. Otherwise all the programs you’ve slimmed for PowerPC will be running under Rosetta on your Intel Mac – unless you take the time to do a fresh installation.

We’ve heard horror stories of early versions of XSlimmer eviscerating Rosetta, so if you use it on an Intel Mac, be sure you don’t strip the System frameworks.

6. Get Rid of Languages and Translations You Won’t Use

Apple is very considerate in providing localizations for many, many languages. But chances are you aren’t using the Catalan, Farsi, or Klingon language localizations on your Mac. And even if you are, you can strip out the other ones you aren’t using and gain more efficiency and drive space using a utility like Monolingual (version 1.3.9 is the last version to support OS X 10.4 Tiger).

By the way, the latest version of Monolingual will also strip out unnecessary chip architectures from your system – but not your applications – so it also performs a function similar to XSlimmer, yet different.

7. Cool Off

The new MacBooks got a bad rap at first for running very hot; the truth is, every Mac will run more efficiently with a cooler processor. Even though Apple has largely fixed cooling issue in MacBooks, I use a utility called Fan Control on mine, which allows me to change the threshold for when my MacBook’s fan turns on and off. This allows me to keep my ‘Book running cooler, which maximizes performance (though it does shorten battery life a little bit).

Watch tower library for mac. Watchtower Library for Mac 2 2.1 is available as a free download on our software library. The actual developer of this free Mac application is Roy Ratcliffe. The application is categorized as System Tools. Download Watchtower Library 2020 and enjoy it on your iPhone, iPad, and iPod touch. ‎You'll find here Watchtower Online Library, Podcast, Daily Text, NWT Bible, Educational Videos, Gallery Wallpapers, Publications, Songs and a lot more for Jehovah's Witnesses in almost all languages.

Publisher’s note: We use smcFanControl on the Mac mini running OS X 10.6 Snow Leopard at Low End Mac headquarters. Modern desktops can also run hot and thus will benefit from fan control software as well. dk

8. Evaluate Your Widgets

If you’re using Mac OS X 10.4.x Tiger, you have probably played around with the Dashboard. There are hundreds of useful widgets available, most for free – but there are many that you won’t use, even if they are very helpful to others. This includes some that came with Tiger.

It takes RAM and processor power to keep these widgets running, even when the Dashboard is hidden, so a judicious evaluation of what widgets you do use can boost computing efficiency nicely. Do you really need that Ski Conditions widget or neeed to have the Clock widget running? If not, disable them to conserve RAM and processor use. This article explains how to use the Widget Manager to remove widgets you don’t want or need.

If you don’t want to use Dashboard at all, you can disable it with free apps such as ‘Disable & Enable Dashboard’ Utility, TinkerTool, and Bye Bye Dashboard.

9. Keep an Eye on Activity Monitor

There may be other things hogging your processor’s attention or sucking up RAM. How will you know about them? By using Apple’s Activity Monitor, which comes with OS X. Activity Monitor will tell you about CPU usage, RAM requirements, virtual memory usage, and whether a given application is a PowerPC or Intel (Universal) build. Check it occasionally to see if there are any red flags – or keep it running for a few days (with one of the useful Dock icons or floating windows enabled) to keep an eye on when things are spiking.

10. Clean Off Your Hard Drive

It doesn’t matter how large your hard drive is – eventually it will begin to fill up. Whether it is a huge iPhoto library, some videos you’re editing, or simply accumulation of lots of “stuff”, a full hard drive can cause problems. (One colleague couldn’t figure out why her drive was so full – until she realized that she hadn’t emptied her Trash in almost four years!)

You may not realize that Mac OS X (and the Classic Mac OS, too) uses the free space on your hard drive as “virtual memory”, and it depends heavily on that virtual memory to run efficiently. If your Mac is starting to feel sluggish, it may be because your drive is too full. There are lots of ways to clean it off, but sometimes a little more free space is all you need to be a peak performance again.

11. Run OnyX

Whenever things get slow on my Mac, one of the “go to” solutions is to run a utility like OnyX. (There are several, many of them free; I’ve found Cocktail and TinkerTool to be other good and popular options. If you choose OnyX, be sure to download version 1.8.6 for Tiger. There are separate versions for each edition of OS X from 10.2 through 10.8.)

These utilities offer a variety of “jobs” and “repairs” to the system, and while some are skeptical about how much this is necessary, my experience has been that they do bring a good level of optimization back to my Macs. I tend to run the whole battery of tools – both the maintenance and the cleaning options in OnyX – at the same time, but you may prefer to set them to run as scheduled routines in a certain order.

By the way, check out fellow Low End Mac writer Charles W Moore’s words about the value of these routines in his recent article on Applelinks, Yes, Running System Maintenance Routines Really Can Help.

It’s not quite like getting a brand-new Mac – after all, the “next new thing” will always be faster than the current offerings, and no one can keep up all the time. But giving some attention to these optimization tasks won’t take long – probably 2-3 hours for all of these, if you did them at the same time – and it will pay big dividends in speed.

You might even put aside those thoughts of upgrading – at least for a few days!

Keywords: #osxtiger

Short link: http://goo.gl/uZKXcA

searchword: optimizetiger